%%	This typesets an IMA Proceeding template  
	%%	  (written in LaTeX2e by Dzung Nguyen) 

\documentclass[twoside]{ima} 
\pagestyle{myheadings}

  	%% "documentclass" (LaTeX2e), "myheading" page style, 
        %% and IMA packages are required.  Please make sure 
  	%% that copies of two IMA style files "ima.cls" and 
  	%% "ima10.clo" are in your working directory.

\usepackage{graphicx,times}

  	%% "graphicx" package is used for handling figures.  
	%% "times" font must be used for being consistent
        %% with other papers.

\sloppy

  	%% Automatic line break 

\begin{document}

\markboth{FIRST AUTHOR'S NAME ET AL. (ALL CAPS, ``TIMES" FONT SIZE OF 8PT)} 
{RUNNING TITLE  (ALL CAPS, ``TIMES" FONT SIZE OF 8PT)}        

  	%% List of all authors' names and the running head 
	%% (all capitalized).  If the list of all authors 
	%% do not fit the text margin in the running head, 
	%% please type in the first author's name as it appears 
	%% in the manuscript and put ET AL.  

\title{IMA Proceeding's title\\ (all caps, ``Times" font size of 
       11pt is required)}
                                                             
\author{First author's name\thanks{
    	First author's address 
    	(e-mail address). 
  	Grant acknowledgement
	(``Times roman" font size of 8pt is required).}
  \and Dzung N. Nguyen\thanks{
	IMA,
	University of Minnesota,
	Minneapolis, MN 55455
        (dnguyen@ima.umn.edu).
        The work is funded by the Institute for Mathematics and
        its Applications (IMA).}
  \and\break George E. Vincent 
	(all caps, ``Times" font size of 8pt is required)\thanks{
	Department of Mathematics,
        University of Minnesota,
        Minneapolis, MN 55455
        (gvincent@math.umn.edu).}}

\maketitle   
             
\begin{abstract}                   
  Abstract's text starts here (``Times roman" font size of 8pt is 
  required).

  Please note that in order to meet IMA specific style 
  and layout requirements please use IMA template and 
  IMA style files, which are in LaTeX2e typesetting.  

  If you don't use IMA packages then you are required
  to simulate your formatted output to look like this layout 
  which has the text width and height of 4.48 X 7.75 inches (or
  11.39 X 19.70 centimeters or 27.0 X 46.71 picas). 
\end{abstract} 
 
\begin{keywords} 
  Text starts here (``Times roman" font size of 8pt is required).
\end{keywords}

{\AMSMOS 
  Text starts here (``Times roman" font size of 8pt is required).
  The 2000 AMS Subject Classification Codes is available
  at \texttt{http://www.ams.org/\break index/mathweb/msc2000/index.html}
\endAMSMOS}

\section{Section 1's heading}\label{s1}
  Text starts here (``Times roman" font size of 11pt is required).

  	%% Section 1 (labeled "s1").  Only the first letter of 
	%% the first word is in upper case unless when it is 
	%% a person's name or an abbreviation example: DNA.

\noindent
\begin{equation}
\begin{array}{ll}
  \displaystyle  x_1  =  \frac 1 3 F_1(x_{1-1}, u_1) 
  	         &\qquad {\rm for}\quad t=1 \\ [12pt] 
  \displaystyle  y_1  =  \frac 1 3 F_1(y_{1-1}, v_1)
  	         &\qquad {\rm for}\quad t=1  . 
\end{array}
\label{eq1.1}
\end{equation}

  	%% Equation 1 (labeled "eqn1.1")

\begin{table}[hb]
\caption{Caption goes here (``Times small cap" font size of 8pt 
  for the heading, Table 1 and ``Times italic" font size of 8pt 
  for the caption's text are required).}
  \begin{center}
	\begin{tabular}{|l|c|l|r|}
	\hline
	Column 1     & Column 2 & Column 3 & Column 4 \\[2pt]
	\hline \hline
	Row 1     & 1 & $-$ 11 & 1.1111\\[2pt]
	Row 2    & 2  & $-$ 2222 & 222.2200\\ 
	\hline
	\end{tabular}
  \end{center}
\label{tab1}
\end{table}

  	%% Table 1 (labeled "tab1")

\begin{theorem}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Theorem 1.1" and ``Times italic" font size 
  of 11pt for the text are required).
\label{the1.1}
\end{theorem}

\begin{proof}
  Text starts here (``Times italic" font size of 11pt for
  the heading, ``Proof", ``Times roman" font size of 11pt 
  for the text, and an ending box are required).
\hfill
\end{proof}

\begin{lemma}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Lemma 1.1" and ``Times italic" font size 
  of 11pt is required)
\label{lem1.1}
\end{lemma}

\subsection{Subsection 1's heading}\label{s1.1}
  Text starts here (``Times roman" font size of 11pt).

  Examples of Cross-referencing: Eq.~(\ref{eqn2.1}), 
  Fig.~\ref{fig1}, Refs.~\cite{bib2,bib3,bib4,bib5} and 
  \cite{bib1}, Subsection~\S\ref{s1.1}.

  An example of Footnote one which is displayed at 
  the bottom of this page.\footnote{Footnote one's text 
  goes here (``Times roman" font size of 8pt is required).}

\begin{figure}[tp]
  \centerline{\includegraphics[width=2.5in]{figure1.ps}}
  \vskip-47pt
\caption{Caption goes here (``Times small cap" font size of 8pt 
  for the heading, Figure 1 and ``Times italic" font size of 8pt 
  for the caption's text are required). All figures should 
  be at the top of a page.}
\label{fig1}
\end{figure}

  	%% Figure 1 (labeled "fig1")

\section{Section 2's heading}\label{s2}
  Text starts here (``Times roman" font size of 11pt).

\begin{definition}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Definition 2.1" and ``Times italic" font size 
  of 11pt is required).
\label{def2.1}
\end{definition}

\begin{proposition}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Proposition 2.1" and ``Times italic" font size 
  of 11pt is required).
\label{pro2.1}
\end{proposition}

\begin{remark}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Remark 2.1" and ``Times italic" font size of 
  11pt is required).
\label{rem2.1}
\end{remark}

\begin{example}
  Text starts here (``Times small cap" font size of 11pt for 
  the heading, ``Example 1" and ``Times italic" font size of 11pt
  is required).  Note that Examples are not numbered after
  a section whereas Theorem, Lemma, Definition, etc. are 
  independently numbered after a section.
\label{exa1}
\end{example}

\noindent
\begin{equation}
  \begin{array}{ll}
   x_2  = &  F_2(x_{2-1}, u_2) \\ [6pt]
   y_2  = &  F_2(y_{2-1}, v_2) \\ [6pt]
   z_2  = &  F_3(z_{2-1}, w_3) 
  \end{array}
\label{eqn2.1}
\end{equation}

\subsection{Subsection 2's heading}\label{s2.1}
  Text starts here (``Times roman" font size of 11pt).

\section*{Acknowledgements}
  All acknowledgements go here (``Times roman" font size of 11pt).

	%% As much as possible use LaTeX's Cross-referencing 
	%% feature: \label{}, \ref{}, \cite{} 

\appendix

\section{Appendix A's heading}\label{aA}
  Text starts here (``Times roman" font size of 11pt is required).

\noindent
\begin{equation}
  \begin{array}{ll}
   r_a  = &  F_a(r_2, p_a)     \\ [6pt]
   x_a  = &  F_a(x_{2-1}, u_a) \\ [6pt]
   y_a  = &  F_a(y_{2-1}, v_a) \\ [6pt]
   z_a  = &  F_a(z_{2-1}, w_a).
  \end{array}
\label{eqnA.1}
\end{equation}

\section{Appendix B's heading}\label{aB}
  Text starts here (``Times roman" font size of 11pt).

\begin{thebibliography}{11}

\bibitem{bib1} 
{\sc Author's name (``Times small cap" font size of 8pt)}, 
{\sl Title of the article (``Times slanted" font size of 8pt)}, 
Journal name (or Publisher's name and place),
{\bf Volume number}(Part number): page number, year.

\bibitem{bib2} 
{\sc T. Takanami and G. Kitagawa},
{\sl Estimation of the arrival time of
seismic waves by multivariate time series model},
Annals of the Institute of Statistical Mathematics,
{\bf 43}(3): 407--433, 1991.

\bibitem{bib3} 
{\sc Alexander S.S.},
{\sl A new method for determining source depth from 
a single regional station},
Seismic Research Letters, 
{\bf 67}, p.~63, 1996. 

\bibitem{bib4} 
{\sc W.M. Telford, L.P. Geldart, and R.E. Sheriff},
{\sl Applied Geophysics}, Second edition,
Cambridge University Press, Cambridge, 
pp.~145--152, 1990.

\bibitem{bib5} 
{\sc G.E.P.~Box and D.A.~Pierce},
{\sl Distribution of residual autocorrelations in
autoregressive-integrated moving average time series models},
J. Amer. Stat. Assoc. {\bf 65}: 1509--1526, 1970.

\bibitem{bib6} 
\bysame,
{\sl Distribution of residual autocorrelations in
autoregressive-integrated moving average time series models}, 
J. Amer. Stat. Assoc., 1970.

	%% \bysame indicates the same author(s) preceding 
        %% the current bibliographic entry.

\end{thebibliography}

\end{document}